Aiwa tpr-990e

Norm i made the mistake of unscrewing the gearbox from the bottom,and had no service manual,i ended up taking the gearbox off to replace the 2 small belts,and it went all downhill from there,it never worked right again,hey norm,have you noticed when you take the gearbox off,its just a manual piano key type cassette deck,not logic..
quote:
Originally posted by Ghettoman:
Norm i made the mistake of unscrewing the gearbox from the bottom,and had no service manual,i ended up taking the gearbox off to replace the 2 small belts,and it went all downhill from there,it never worked right again,hey norm,have you noticed when you take the gearbox off,its just a manual piano key type cassette deck,not logic..


Paul -- I thought I sent you a Service Manual? Anyhow, I did not disassemble the gearbox. At least I don't think I did -- been a long time, can't remember. Unless something is broke in there, that isn't something I would recommend disassembling. On ANY cassette deck, I would not recommend breaking it down any further than necessary to effect the belt change. In fact, if you don't believe me, try breaking down the cassette deck on any deck, even a simple one, and once you get too far, it's almost impossible to get back together again. So, I'm gonna say, tread carefully unless you know what you are doing. This is one boombox that you don't want to do blind. And I agree -- the mistake was trying to disassemble that box -- don't do that. Parts are no longer availabe to service that gearbox anyhow so if something in it is broke, you aren't gonna get any parts no how so leave it alone.
quote:
Originally posted by Samsnite:
Yes, the dolby ic... Roll Eyes seriously, my knowledge in electronics are minimal Big Grin

But thanks for the tip tho


Frown. Aiwa sounds better than my gf-9696. You would like it i promise Smile.

Maybe i can check what's wrong with your Aiwa. Send a pm if you are interested.

I know this is a old topic, but I have to say:

 

I found one with very issues, like radio and tape deck not work and stop eject button locked and DUST EVERYWHERE!!!

Only Line in is working on my Aiwa.

 

With some difficulty, I got disassemble the internal chassis and make a good clean up (no dust anymore)  and solve the stop eject button problem.

 

All I can say is WHAT A SOUND!!!!!! 

 

For that size, is almost unbelievable!!!!

 

 Cheers.

Add Reply

×
×
×
×