Sony TC-WE435 issue

Discussion in 'Cassette Decks' started by funkitall, Mar 11, 2018.

  1. funkitall

    funkitall Active Member

    Messages:
    151
    Trophy Points:
    28
    Location:
    Nottingham
    Hi
    Can anyone offer some assistance?
    My old tape deck went kapputt a few months ago and I then found a Sony TC-WE435 on ebay...£25 plus £14 for p&p.
    Due to the seller falling ill it took nearly 6 weeks to arrive but all the time we were "chatting" so no worries on the delay
    Once it arrived....oh dear...it didn`t work... kept throwing up E on both decks.
    So I took the unit apart and the belts are still intact...
    Now I am a knob when it comes to technology (doesn`t matter how basic) so I emailed a UK belt seller twice for some guidance and still nothing...
    So my question is ....when you push play the wheels spin and then the unit goes tap tap, wheels spin and then it stops..E appears on the dash.
    The belts do feel as if they have plenty of give in them so could this be the issue or is there another problem?

    Now the seller is a gent and he refunded me the full price and I have told him that If I re-sell the unit I will give him all the money bar ebay fees etc.....
    But I would love to fix it and then I can repay the guy any monies owing to him....only fair....

    So does anyone have any advise?
     
  2. Jorge

    Jorge Well-Known Member

    Messages:
    1,754
    Trophy Points:
    113
    Location:
    Malibu, CA
    watch what happens inside the mechanism when you turn the deck ON: there is just one motor and one belt which does all the job. If belt is stretched then mechanism won't be able to set into Start position. From what I see fixing right now a similar cheapie, Both cassettes must work, but maybe I am wrong here. Will update later.
    Do not expect much help from those with "know-how", these cheap double decks are not worth fixing, so probably they just do not know... sorry, somehow this sounds wrong, "they" do know but the time wasted on such deck is the time, well, wasted...
     
  3. funkitall

    funkitall Active Member

    Messages:
    151
    Trophy Points:
    28
    Location:
    Nottingham
    Hi Jorge
    Thanks. I look forward to any insight you may have.....
    I know the deck isn't a "Nag" but when funds are tight a deck is a deck......
     
  4. bub

    bub Active Member

    Messages:
    265
    Trophy Points:
    43
    Location:
    Singapore
    Find the cheapest new belts that fit your model first. For All in one boombox type mechs like these, a single motor does all the work, including changing modes and raising the heads. A weak belt will prevent successful mode changes, and errors.

    Or, sell it and get a working single well deck with better specs if a new belt kit for this sony is too expensive.
     
  5. funkitall

    funkitall Active Member

    Messages:
    151
    Trophy Points:
    28
    Location:
    Nottingham
    Hi Bubs
    Thanks for the help.
    I have seen a set on ebay for £10.99 so I will decide whether to sell the unit or fix it.....
     
  6. mrp32Dave

    mrp32Dave Well-Known Member

    Messages:
    276
    Trophy Points:
    63
    Location:
    United Kingdom
    Yeah most likely the belts, very easy to do on this deck, here's the service manual to help.
     

    Attached Files:

  7. funkitall

    funkitall Active Member

    Messages:
    151
    Trophy Points:
    28
    Location:
    Nottingham
    Cheers mate
    I will grab the belts.....never done this before but it looks fairly easy to do...
     

Share This Page