Toshiba RT-s782 drive belts needed

I have now reposted this thread from the new members one
Well I managed to find some belts on Ebay( i sent them off and he matched them up for me) All fitted and working so i thought!, I put it back together and the tape just "spools" as in it plays and jams up and unspools the cassette even though all the motors/gears are working, i took it all apa rt and it doesnt always do it, I notice there is a "Jockey wheel/gear that sometimes touches a off set lever that when it does the tape plays up, What is happening please also in 3rd pic the is a lever that when i put the tape mechanism back it moves, is this anything to do with it, Sorry about my poor descriptions

 

Any thoughts on why the cassette keeps jammimg up still?
Thanks

 

You mean takeup reel does not rotate or doesn't have enough torque to spool the tape ?

 

It tries to rotate but as you say might not have enough torque

 

If that's the case I would check 2 things:
- that the actual takeup reel is free to rotate, in the sense there's nothing adding extra resistnace.
- that the clutch is actually providing enough torque to begin with;
- any idler tire that may exist between the clutch and the actual takeup reel;

Given I can't see most of the mechanism can't tell more.

 

I am not sure what parts you mean in your help for fixing can you possibly highlight them for me please, Thanks

 

Clutch is the part with the blue rubber band on it. That seems to drive the takeup reel through an idler (marked green), but there's not enough light to see clearly.
First of all that clutch needs to be connected to the main flywheel with a belt, which I don't see there or it's not properly installed.

Apart from this you really need to clean everything better, since there's a lot of leftover belt residue on the flywheel and probably somewhere else.

 

Thanks that pic last pic was an older one i took before i fitted the new belts, i have also cleaned all the old belt residue off before i fitted the new ones