Sony Compact Disc Player D-5A Potentiometer Replacement

Discussion in 'Discmans, Minidisc, DCC and other players' started by Capturing Memories, Oct 11, 2026.

  1. Capturing Memories

    Capturing Memories Member

    Messages:
    39
    Trophy Points:
    8
    Location:
    California
    On the work bench the Sony D-5A player with one audio channel out, but with volume all the way up it suddenly burst to full volume, The culprit is the volume potentiometer. Basically one of the brushes came loose and not making a good contact. It can be glued back on but I don't want to take chances.

    I found few on eBay but with all fees included it comes to over $30, Are there any other sources to get this particular form factor potentiometer at a reasonable price? The original part # for RV301 stereo volume potentiometer is 1-230-260-00 RES, VAR, CARBON 10K, marked on the part as DT103B.

    IMG_9246.jpg

    IMG_9248.jpg

    IMG_9247.jpg
     
  2. Capturing Memories

    Capturing Memories Member

    Messages:
    39
    Trophy Points:
    8
    Location:
    California
    I'm trying to order the potentiometer from this US seller but he keeps canceling my orders saying that this is for Sony cassette Walkman not suitable for the D-5A, but they look physically the same with same leg placement and design, Why would Sony makes two identical potentiometers with 2 or 3 mm difference in size, it doesn't make sense.
     
  3. Valentin

    Valentin Well-Known Member

    Messages:
    2,129
    Trophy Points:
    113
    Location:
    Europe
    If the value is the same, it will work. The DD one looks identical to it. This potentiometer has been used in quite a few devices, it's likely it will work on this CD player.
    Tell the seller you want to use it for a DD walkman if he doesn't want to sell otherwise.
     
  4. Capturing Memories

    Capturing Memories Member

    Messages:
    39
    Trophy Points:
    8
    Location:
    California
    He finally accepted the order after explaining to him what you've just said after doing some research this morning, To his credit the part # on the DD service manual is completely different than the one I mentioned above for the D-5A, But that doesn't mean anything. I will report back when I get the part.
     
  5. Capturing Memories

    Capturing Memories Member

    Messages:
    39
    Trophy Points:
    8
    Location:
    California
  6. Valentin

    Valentin Well-Known Member

    Messages:
    2,129
    Trophy Points:
    113
    Location:
    Europe
    The seller won't sell the part unless you want it for the right device. That's interesting, don't think I've ever seen a seller like this before.

    Agree with the SONY part numbers, they had different part numbers for parts that are very simillar or maybe identical but with minor changes like being re-design, a different batch. So that part number tells little.
     
  7. Capturing Memories

    Capturing Memories Member

    Messages:
    39
    Trophy Points:
    8
    Location:
    California
    I found some on Aliexpress with higher shipping rates, Probably the same seller, Apparently some Toshiba Walkmans share the same part as well, I've also found a supplier who offers an improved version with metal shaft, Not sure how that insulates the left and right brushes though.
     
    Valentin likes this.
  8. radiorich

    radiorich Active Member

    Messages:
    286
    Trophy Points:
    43
    Location:
    Washington state
    glad you found one !!
    Sincerely Richard
     
  9. Capturing Memories

    Capturing Memories Member

    Messages:
    39
    Trophy Points:
    8
    Location:
    California
    Thanks, Finally I can wrap up this project and move on to designing a Li-ion battery pack for this portable model, The battery pack dimensions will the same height and width of the portable itself and about 1" (25mm) deep, it connects to the power jack of the back of the CD player and snaps to the rear feet of the portable, It will make it really a true Walkman.

    I will 3D print it and use off the shelf connectors and battery holders, Stay tuned for a new thread about the project.
     
    Last edited: Oct 19, 2026
  10. radiorich

    radiorich Active Member

    Messages:
    286
    Trophy Points:
    43
    Location:
    Washington state
    looking forward to seeing your battery holder build I am working on discman but the vendor sold me a gear that is a little undersized .
    Sincerely Richard
     
  11. Capturing Memories

    Capturing Memories Member

    Messages:
    39
    Trophy Points:
    8
    Location:
    California
    The Sony D-5A repair is complete, I got the potentiometer from Aliexpress and it was identical, now I can move to the battery pack design.

     
  12. radiorich

    radiorich Active Member

    Messages:
    286
    Trophy Points:
    43
    Location:
    Washington state
    that is great news !!
    sincerely richard
     
  13. Capturing Memories

    Capturing Memories Member

    Messages:
    39
    Trophy Points:
    8
    Location:
    California
    Since the D-5A operates on a 9V system I'm going to base the battery pack on two 9V PP3 type with Li-ion chemistry, I run some tests with two connected in parallel, I was able to get 3.5 hours of running time at mid volume, which is not bad compared to the bulky massive cluster of 6 C-cell batteries Sony made that can run a little over two hours, I will repeat this test to get some consistency, Once the tests are done I will move to the design of the pack.
     
    radiorich likes this.
  14. radiorich

    radiorich Active Member

    Messages:
    286
    Trophy Points:
    43
    Location:
    Washington state
    Sounds Good ,
    I find copilot very handy for stuff like calculating run time because I am also designing a battery pack for some devices too.
    Richard
     
  15. Capturing Memories

    Capturing Memories Member

    Messages:
    39
    Trophy Points:
    8
    Location:
    California
    It's hard to measure the load on a CD player, Music varies across different tracks and CDs, so the measurement can be way off, Therefore the best way of doing it is to let it play in real time.
     
    radiorich likes this.

Share This Page