Had no idea about the mirror sites, never run into those. Indeed such sites would be a problem and there must be means to stop such abuse, no...
It is your WM-504, it's the only good picture I have with the repair of this gear. Repairs done on WM-10/20/30 units are not as visible as the...
I've never read about requirements for membership either. Looking at some screenshots posted on the below threads, I realise there were a lot of...
SONY is no longer in the market of wired headphones or IEMs (apart from MDR-Z1R) despite there's a pretty significant audiophile market for such...
Thanks for the offer, appreciate it ! At the moment I don't need anything, but will ask in the future if in need. Given this I don't think...
I recommend using watch oil for the motor bearing. However note you won't get immediate results, it will take some time of use before the motor...
@theLGA80s About the Dolby NR problem on first unit, I would check the capacitor on Vref pin of Dolby IC. Don't mess around with the trimpots,...
About the other threads, I suggest to report them asking the admin to delete because you posted twice. See there are 2 threads in the walkman...
Watched the video, so let's take the problems one by one: - the door problem: would check the AA battery contacts and if battery is properly...
Not just they are not accepting new members (and probably never will), but they are deleting accounts without any explanation. I recently needed...
Yes, on WM-100/200/500 series table reel is very easy to remove: just open the door and remove the split washer holding it while keeping the reel...
Your problem is a cracked takeup reel ring gear, common problem on many series using this type of table reel design: WM-10/20/30, WM-100/200/500...
Want to make a couple of remarks: 1. HX Pro has nothing to do with the head, it's an electronic circuit that varies the bias with signal level in...
About the buttons occasionally having a different effect, that's because they work using a resistor ladder which generate an analog voltage read...
In regard to LED not staying on, I would clean the leaf switches as it's a common problem on these units. Sometimes it might need sanding (use...
I don't think there is any failsafe protection inside it as there's just barely enough space to fit the step-down converter. But we'll see....
There won't be any DD release, there's just not a big enough market for it. VWestlife has recently made a video comparing 4 of the common new...
Please download the service manual from here: https://elektrotanya.com/sony_tps-l2_sm.pdf/download.html Note there are 2 variants of TPS-L2 with...
Most likely some wires got broken off and you have no power to the main PCB (the one that has the amplifiers), hence no sound. So I recommend to...
Looking at the layout, it seems the board is a bit complex for a 2 layer and also has double sided load (components on both sides) and is...
Separate names with a comma.
