HOME - Back to board
 

Are your GF cassette doors opening to fast???

bredgeo - 2010-05-02 13:29

Hey guys and gals,

Yeah, so... are your GF 555 or 767/777, 7500, 9595, 9696, and others that have the same system, cassette doors opening to fast?

They then have this:

that is a simple mech that has a type of translusid grease which will evaporate with time in some cases...

It looks like this inside;

So you can see that there is an area where this grease goes (where the smaller of the discs is), and this grease slows down the wheel thus the door...

Take that part of the door... take your time spliting it open (once opened, sand or file down the tits and slightly the main surface... That is better when putting back together, and the ruggedness makes it more air tight).

Now, yours probably has no more of that grease, that is why the doors are opening so quickly... If you have a good grease to replace the original, go for it but note... It has to be QUITE thick!!!

After having tryied a good few greases, I found that the best and thickest substance for this is not grease but epoxy glue!!! NOT BOTH COMPOUNDS, for that will harden and you have screwed you little door slower upper Big Grin

Take just one of the compounds (I am just showing two different brands so you can see that you can use any):



Take the clearer compound, put into the mech:




Pinch it tight, screw it back into place and try it out!

You sould be happy!!!!

Bye now!

retro.addict - 2010-05-06 15:23

But Araldite is a glue which, when you mix the two parts together, is as strong as cement.

fyj2972 - 2010-06-15 15:18

Hey, I am back.

This is right stuff for your cassette door damper gear, It's called silicon grease.

im.out.of.hear - 2010-06-15 15:43

Woah !! its amaizing to see you Nod Yes
you have been away for sooo looong,i thought you abandoned us for good..its great to see you !!!

fyj2972 - 2010-06-15 16:50

No, I didn't abandon you guys. Just being busy lately.


Smile

BTW, I have receiced this full of BS Email from a member of stereo2go, Check it out.

bredgeo - 2010-06-15 21:00

YOU ARE BACK!!!!! WOW!!!!!

A lot has changed, you will see!!!!!!

So, that is the correct stuff??? Need to get some!

The single compound from the epoxy is still doing its job, if not!!!!

And..... Ha, ha, ha, ha!!!!! For what you were sent!!!!

Things like that are from impotent men that can only get thrills in that way for the rest of there lifes. They are fun to read!!! I got a few as well. they are great laughs!!!!!

Well, welcome back and, do stay a while... Nod Yes Nod Yes Nod Yes

Thank you!!!

isolator42 - 2010-06-24 18:23

Hey Frank, long time... Smile

It seems many members have had similar messages. Don't give it a moment's thought, they've all been proved to be FAKES & nothing more, as I'm sure you've already worked out Smile

I mean c'mon... "never provided any real tech help"? It'll be a while before I read a bigger pile of cr4p than that! Big Grin