HOME - Back to board
 

aiwa 600 belt problem

lazanas - 2008-03-13 14:39

Hey guys, here is my firs qestion at Tech Talk Smile I have the same problem which was discussed here: http://stereo2go.com/eve/forums/a/tpc/f/8596027254/m/85...531075823#8531075823 Can someone take a picture of how the belts should be set and what diameter should they be? Red Face

masterblaster84 - 2008-03-13 20:15

Welcome Lazanas, I don't have any pics for you but your avatar is cracking me up.
Laugh Out Loud

lazanas - 2008-03-16 01:56

Anyone? Frown

skippy1969 - 2008-03-16 15:18

I have a cs600. But I don't know what size belt it uses. But I know it uses three belts. One short square cut belt for the tape counter,One square cut belt for the rewind and fast forward idler and a large flat main belt. If you really need me to I can take mine apart and take a picture of the cassette drive so you can see how the belts are routed. Wink

lazanas - 2008-03-17 10:15

quote:
Originally posted by skippy1969:
I have a cs600. But I don't know what size belt it uses. But I know it uses three belts. One short square cut belt for the tape counter,One square cut belt for the rewind and fast forward idler and a large flat main belt. If you really need me to I can take mine apart and take a picture of the cassette drive so you can see how the belts are routed. Wink

Wow!!!! Thanks, that would be great! Cool Cool Cool

skippy1969 - 2008-03-17 11:32

Cool then,I'll try to get you a picture later this week. Big Grin

lazanas - 2008-03-20 10:56

I measured the belts, but I dont know where this doohecky thig has to be (the one in the hand)


[IMG] [/IMG]


I found it in the AIWA Tap Toes
Skippy, have I placed the belts (so far) correctly? Confused

fuzzyduck - 2008-03-20 13:57

Hi Lazanas,
That bit is part of the recording system which detects if the protection tabs on the cassette have been removed. I'm not sure what it's called though, record interlock maybe? Roll Eyes

Here's a pic of my CS-660 deck with the part fitted, looks like it just clips in.
Smile

lazanas - 2008-03-20 14:17

quote:
Originally posted by Fuzzyduck:
Hi Lazanas,
That bit is part of the recording system which detects if the protection tabs on the cassette have been removed. I'm not sure what it's called though, record interlock maybe? Roll Eyes

Here's a pic of my CS-660 deck with the part fitted, looks like it just clips in. Smile


Thanks Fuzzy! Big Grin Cool
soon the 600 will be fully working Nod Yes

And good luck with your 660 too! Smile

skippy1969 - 2008-03-20 14:54

Yup,There is a smaller belt that goes from the back of the large aluminum flywheel to the white plastic pulley directly above the main flywheel. There are three belts on your unit ,total. The smaller belt you need is for the forward and rewind takeup reels. Nod Yes

lazanas - 2008-03-21 03:24

YESSSSSSSSSSSSS!!!!!!!~~ Big Grin it works! IT WORKS!! Cool Thanks to everybody who helped me out! Nod Yes Wink

skippy1969 - 2008-03-21 08:11

AWESOME,congrats! I knew you could do it. Wink Big Grin

fuzzyduck - 2008-03-21 12:46

Nice work! Cool

moncheeto - 2008-03-21 12:58

good work