Once my belts arrive I'm going to give it a go. Just wondering if anyone has pics of the process. I found these instructions by AK-47 on a very old thread

"to replace the belts on a vz2000,you dont need to take the back off.lay it on its back.on the bottom are two metal square plates the hold the springs for the lp player.take these two off.then open the lp drawer.theres a plastic cover that holds the lp when the drawer is shut.on it are two screws .take these off and remove the plastic holder.inside there are two brass screws with black rubber washers on.remove these carefully because they hold the entire lp playing mec.and its heavier than you think.then you undo a couple of cable ties so you can bring it out of the whole radio.i needed a second person to hold the lp door open while i unscrewed the last two screws.hope this helps"

Sounds straight forward enough, but if someone had pics that would be awesome.

If no one has any pics I'll take some myself, that is if I can actually change it myself!! Otherwise I'll have some pics so you guys can show me where I went wrong!

Also I've ordered a belt for the stylis to, is that pretty straight forward? Will I see it when I'm changing the turntable belt?

the turntable belts are pretty easy rambo, but the ones for the arms are a lil harder. no pix sorry.