Sharp GF 777z Belt replacement
mrupscale1 - 2012-06-22 10:03
I am going to tackle the belts on my 777 and i am wondering if there are any shortcuts or anything i should watch out for. A detail on this would be great. My unit plays as it should but FF/REW wont work with cassette in place but will work without cassette. Is there an adjustment needed??
deliverance - 2012-06-22 10:21
the chances are the idler wheels under the flywheels need a good cleaning on mine they were dirty once cleaned ff/rw were spot on .
radio.raheem - 2012-06-22 11:23
dell is correct
litfan - 2012-06-22 13:32
Just make sure, you put the belt round the plastic posts, as below. Otherwise, it`s almost impossible to do. Deliverance is right, clean the little idlers, while you are at it.
litfan - 2012-06-22 13:47
The idlers, are under the flywheels.
mrupscale1 - 2012-06-22 13:54
Thanks Everyone for your input. Now i need to know where do i start, after removing back. Dont want to remove un-necssary screws from unit.
litfan - 2012-06-22 14:07
Oh heck. If you haven`t attempted to change belts before, i wouldn`t try the 777. It`s up to you, but, you really need a service manual.
deliverance - 2012-06-22 14:17
http://www.mediafire.com/?7zmrmzm9jrl this will help
litfan - 2012-06-22 14:22
That`s top stuff man, nice one. This is invaluable to gf777, 909, 919, 999, 1000 owners.
mrupscale1 - 2012-06-22 14:36
Thanks Deliverance this should help or at least help md to decide on if i want to tackle this weekend!!lol