Stereo2Go Forum Reader

retrodos - 2012-05-09 20:53

This one had speed issue play to fast and motor didn't shutdown, was cause by bad servo control circuit IC 602, was replaced now works great. You do have to desolder every wire in that area to get to IC packages pins.

retrodos - 2012-05-09 23:04

After being rebuilted

retrodos - 2012-05-09 23:20

Here what it look like before

http://www.etsy.com/listing/99...y-wm-d6-professional

lapis - 2012-05-10 08:08

Does the TC/WM-D6 use an amorphous or a ferrite head? Both these heads are used in high end recorders due to low-losses on the core (which affects sound quality).

retrodos - 2012-05-10 11:27

Originally Posted by Lapis:

Does the TC/WM-D6 use an amorphous or a ferrite head? Both these heads are used in high end recorders due to low-losses on the core (which affects sound quality).

Ferrite head.

lapis - 2012-07-14 03:18

Originally Posted by retrodos:

Originally Posted by Lapis:

Does the TC/WM-D6 use an amorphous or a ferrite head? Both these heads are used in high end recorders due to low-losses on the core (which affects sound quality).

Ferrite head.

So the D6 uses a ferrite head and the D6C uses an amorphous head?