HOME - Back to board
 

Part needed Aiwa HS-JX505 Pictures

martymcfly - 2013-08-02 13:49

I recently found a Aiwa HS-JX505 at a local flea market.  The unit is in good condition except it is missing half of the connector that allows the battery box to send juice to the unit.  I opened the unit and sure enough the parts fell out.  Item is broken and missing half of the other connector.  Anyone have this part? Pictures of the item needed below.  Thanks sure would like to get this up and running.  

photo-8

photo-7

plop - 2013-08-03 05:33

I have one that is in even worse state than yours on a scrapper unit. The gold plate has all but gone, and the copper corroded green to the point of nothing where it connects to the PCB.

 

What you could is get some copper sheet. Cut the copper sheet to size and mould to shape in order to replace the missing piece.

 

 

martymcfly - 2013-08-22 15:53

Found a cheep HS-PX60 something on ebay 2 for 25.00 and desoldered it and use some desolder mesh and bam the unit is back to life.  My first repair other than a belt replaced went surprisingly well.
Originally Posted by plop:

I have one that is in even worse state than yours on a scrapper unit. The gold plate has all but gone, and the copper corroded green to the point of nothing where it connects to the PCB.

 

What you could is get some copper sheet. Cut the copper sheet to size and mould to shape in order to replace the missing piece.