HOME - Back to board
 

FS Aiwa HS-EX3000 & HS-PL707

tuna - 2012-10-08 04:06

Hello!

 

I would like to sell these two due to unexpected circumstance. 

 

The HS-EX3000 is the same as HS-JX3000 but was available in Japan. I think there is also a slight difference in the world tuner and world clock as well. The player/recorder is in excellent cosmetic condition and has been recently serviced by Plop so you know it is exemplary in terms of operation. All the capacitors have been replaced, belt replaced, mechanism cleaned and fine-tuned and the back-up battery was replaced as well. It comes with the original charger (120V), external 2AAA battery case and remote control. Unfortunately, no other accessories are included.

 

The HS-PL707 is in very good cosmetic condition but with no obvious flaws like scratches, let alone dents. Wear is visible on the buttons. It has a narow gap HX head, Dolby B, auto-reverse, 2-stage DSL and 3-stage BBE high definition sound processor. It comes with a leather carrying case and the external 2AAA battery case.

 

If you are interested, please send me a PM with your offer.

 

Cheers!

Antun

plop - 2012-10-08 07:00

Tuna,

 

Sorry to see that you are not able to keep your AIWAs.

 

If it helps with the sale here are some photos of the repairs that I took during the process.

 

 

 

Tape transport with broken and mushy belt stuck to pulley wheels

 

IMAG0492

 

Both halves of PCB and head assembly

 

IMAG0493

 

Close up of melted belt on the PCB

 

IMAG0495

 

Close up of damaged pinch roller assembly

 

IMAG0496

 

Close up of failed internal battery (sorry no photo of replacement battery)

 

IMAG0497

 

Close up of failed capacitors prior to replacing

 

IMAG0498

 

Close up of motor before cleaning

 

IMAG0499

 

Close up of belt path with broken belt stuck to various pulley wheels

 

IMAG0500

 

Tape transport after cleaning

 

IMAG0501

 

Close up of pulley wheels following cleaning

 

IMAG0502

 

Close up of motor after cleaning

 

IMAG0503

 

Removed sticky bits of old belt

 

IMAG0504

 

New belt to be fitted

 

IMAG0505

 

New belt fitted and moving parts lubricated

 

IMAG0506

 

Old capacitors removed, also showing where some of them have leaked onto PCB

 

IMAG0507

 

New capacitors fitted. I have used 6.3V United Chemi-Con branded caps throughout

 

IMAG0508

 

Damaged pinch roller assembly next to pinch roller assembly salvaged from a scrap HS-PX610

 

IMAG0509

tuna - 2012-10-17 07:44

Thank you for everything Plop! You're quite a gentleman.