FS Aiwa HS-EX3000 & HS-PL707
tuna - 2012-10-08 04:06
Hello!
I would like to sell these two due to unexpected circumstance.
The HS-EX3000 is the same as HS-JX3000 but was available in Japan. I think there is also a slight difference in the world tuner and world clock as well. The player/recorder is in excellent cosmetic condition and has been recently serviced by Plop so you know it is exemplary in terms of operation. All the capacitors have been replaced, belt replaced, mechanism cleaned and fine-tuned and the back-up battery was replaced as well. It comes with the original charger (120V), external 2AAA battery case and remote control. Unfortunately, no other accessories are included.
The HS-PL707 is in very good cosmetic condition but with no obvious flaws like scratches, let alone dents. Wear is visible on the buttons. It has a narow gap HX head, Dolby B, auto-reverse, 2-stage DSL and 3-stage BBE high definition sound processor. It comes with a leather carrying case and the external 2AAA battery case.
If you are interested, please send me a PM with your offer.
Cheers!
Antun
plop - 2012-10-08 07:00
Tuna,
Sorry to see that you are not able to keep your AIWAs.
If it helps with the sale here are some photos of the repairs that I took during the process.
Tape transport with broken and mushy belt stuck to pulley wheels
Both halves of PCB and head assembly
Close up of melted belt on the PCB
Close up of damaged pinch roller assembly
Close up of failed internal battery (sorry no photo of replacement battery)
Close up of failed capacitors prior to replacing
Close up of motor before cleaning
Close up of belt path with broken belt stuck to various pulley wheels
Tape transport after cleaning
Close up of pulley wheels following cleaning
Close up of motor after cleaning
Removed sticky bits of old belt
New belt to be fitted
New belt fitted and moving parts lubricated
Old capacitors removed, also showing where some of them have leaked onto PCB
New capacitors fitted. I have used 6.3V United Chemi-Con branded caps throughout
Damaged pinch roller assembly next to pinch roller assembly salvaged from a scrap HS-PX610
tuna - 2012-10-17 07:44
Thank you for everything Plop! You're quite a gentleman.