Looking For Wm-100 Battery Compartment

Hi,

You can see the crack on the first picture.
As I repaired several DD‘s and other WM i know about the problems such gears cause.
My question is about the WM 100/200 series, you can hear it when FF, not at normal Playback.
But the cause seems the same as on the DD center Gear, shrinking.....



Harry

 

Hello,
¿There was any progress on creating the 3d-model?
I have one of those walkman and I am very interested on getting a battery holder, because I feel that the mod to put it back on the line again is a little dangerous.
I try to measure the Rechargeable Battery Holder using the repairing manual description and I obtain this.
Height: 1.1 cm
Length:6.98 cm
Widht:2.15cm
Hope it helps and expecting a 3D Model.
Best of the Lucks to you

 

I own a wm r 202 with said holder i'm sending it to be 3d scanned so i can sell kits or sell 3d files so you can print it
Expect a few weeks till its done (for AA)

 

okay folks = I've bought a 3d printer and plan to design and print a battery holder for the WM-101
Of course it would be 10 times easier if I had one in my hands to measure - if anyone has one they would just loan me, of course I would only need it for a few days!
Just looking at your measurements @Boodokhan above on your digital verneir - could you please confirm that was a WM-101 battery case..?

 

The battery compartment for WM-101 is same for WMF202 ( I used WM-f202 battery compartment for measurement)
So the measurement is exactly same for WM-101

 

https://www.ebay.ca/itm/Sony-Walkma...254791?hash=item1a85948cc7:g:sDwAAOSwsnldRDyx

 

Managed to source some NOS battery holders - contact me if you are interested in swaps - WM-F200, WM-F202 etc
https://www.ebay.co.uk/itm/27432150...IT&_trksid=p3984.m1555.l2649&autorefresh=true

 

Did you sell through all your battery holders? I'd be interested in one if you have any left. Thanks!

 

https://www.ebay.es/itm/304214215164 SONY WM-7 [tapa bateria] en impresion en 3d [tapa de bateria en impresion 3d]
https://www.ebay.es/itm/304171542701 SONY WM-F200 / II WALKMAN [caja bateria en impresion 3d] caja de pilas en impresión 3d
https://www.ebay.es/itm/304175337034 AIWA HS-PC202 [caja bateria aaa] en impresion en 3d [caja de pilas en impresión 3d]
https://www.ebay.es/itm/304145132505 Battery Door Cover for walkman AIWA HS-P06 (COLOR NEGRO Y COLOR GRIS )

 

I have a 3D model of a battery holder for my WM-F100… did all the electrical with either 14 or 16ga single stranded un-insulated wire. If anyone wants the file, send a PM.

I recently bought a nice red 102 w/o holder and a black 101 w/ holder. The idea was to use the 101 battery holder for the 102…. They are close, but not the same. Does anyone have a file or dimensions or a spare battery holder for the Wm-102 models that they would be willing to share. I have full 3d modeling and printing capabilities and would make sure whatever I come up with for a model is available to the community. These holders are a nightmare to find but the Wm-10* models are my personal favorite portables and it would be a shame if they all disappeared or became unusable because nobody can connect a power source.

anyway, please help me turn this red beauty into my every day portable (shown with the 101 holder - fits, kind-of…. Not a reliable electrical connection:

Any help or info would be much appreciated!
cheers!

 

I can't help you with the request unfortunately, just here to comment that the red one looks amazing!

 

Thanks! Can’t wait for it to become my daily user.

 

Also see here if it can help you

WM-r202, WM-100 ect. Battery case capacitor size? | Stereo2Go forums