Valentin, you have once again kept this project on track and moving forward, for this I am very grateful. I rotated the back plate and the motor...
Well, I thought that I was there, made one more attempt getting the spindle installed and it work. The difference was using a socket as suggested,...
The four washers is what was on the shaft originally, I did not take note of which position they were in when I disassembled it. Actually, I did...
I am still struggling to reassemble the motor, what seems so simple on the surface is turning into a real ordeal. Using Valentin's suggestion, I...
Johny, in checking I do not see any openings, unless there might be something under the rubber grommet. It looks like the grommet could be easily...
Well, I have had several sessions trying to reinstall, but I am pulling my hair out trying to find someway to position the commutator between the...
Valentin - I've been away from this project for the past several days with health issues, I'm now back and ready to continue, but I have two...
The only motor disassembly video that I have found is the "Living Analog" video that I found at the beginning of this thread, that is the one that...
In reassembling the motor, I have a couple of questions. As was suggested in this thread, removing the motor shaft required considerably more pull...
Perfect, this adds a great deal of clarity, Thank You! Any advice on oil? What should I use or not use?
Yesterday I disassembled the motor, using the Living Analog video, plus the many helper notes in this thread, gave me the encouragement to move...
After studying this thread plus the thread here, I started back to work on my Walkman today. After unsoldering the FG and power wires I tried...
Thank you for the clarifications. I am going to spend the next two or three days studying this thread and others in the forum before I proceed....
I'm sorry I was not clear, I just was not sure if the violet wires had to be disconnected from the circuit board. I unsoldered the violet from the...
Okay, so I went ahead and disconnected both violet wires then connected to a battery, pushed the play button, nothing at all from the motor. I...
Separate names with a comma.
