@euroflash : HPR being the Hanspeteroth? French eBay? @givemeyourwalkmans there is a lot of helpful info on the T-100 software in a couple of...
@Valentin : OK, very informative! Thanks for that info!! I've run into the mirror site! In the last year, when I would google for components +...
@Valentin : I've never read any requirements for membership... since I've retired, I see many of my old vendors and forum friends retiring...
@Valentin : I'm sad to hear that happening! Is there anything specific I can help you look for? In the last 5 years I've uploaded over 100...
@scintor Broke SM into 4 sections, easiest way to get it to you:
@scintor: I have heard HiFiEngine (and VinylEngine) appears not to be accepting new members, too bad there is so much reference materials there:...
@scintor : did you reflow solder at the meters? or just at the power supply? Mine was very clean, and came from an original owner, so it was very...
Closer view ot the micro switch: [ATTACH] I cleaned mine in place, so I had to remove the screws and wiggle the switch out from under the...
@scintor : Do you have a copy of the shop manual for the V6? that helps some. the switchs are located along the top of the cassette mechanism:...
OK, I admit defeat... I had seen the switch in BX2 diagram (post 6) and had hoped BX1 would be simply finding where something like this would fit...
@Jorge : sorry for any confusion: I had read somewhere(Audiokarma link in the initial post) that with the BX-1 : No Dolby = no MPX filter; Dolby...
I blew up the MPX card diagram to be easier to see... I've been trying to see where the switching takes place, must be on the main board.. I would...
@Jorge : excellent! I was hoping there could be a way to "jump out" the MPX filter... I don't want to damage the deck, and your idea seems pretty...
There is a service manual for this deck on HiFiEngine... https://www.hifiengine.com/manual_library/dual/cc-5050.shtml You will need to create an...
[ATTACH] I did find on BX-2 (sister deck) diagram in Sce Manual: seems simple, if I could see clearly where to insert switch... BX2 doesn't have a...
Separate names with a comma.
