Found the fault! The thin plate which is mounted on the left drive spindle.( see pic ) This was stiff to move due to the grease hardening After...
Hi, Found the problem. It is the direction mech causing the issue. I just need to strip it down to see what's causing it oscillate between...
Two more pics Ist showing drive pulley in position 2nd showing underneath of pulley The small cog at the bottom engages with the black cog which...
hi, Does anyone have some pictures of the belt side of this deck mech ? Problem I have after changing broken belt is the sliding bit keeps sliding...
Found the fault I'd replaced a 100uf cap with a 10uf !! 100 uf cap now fitted all is well Should have gone to spec savers !
Now I have the circuit I'll get the scope out ! I noticed the motor servo chip is the same as fitted in the wd6c !
Just checked it. Interesting it sounds fine with Dolby on but distorts when Dolby it turned off at high volume
Hi, Thanks for the info,found it now Problem I have is distortion at high volume with Dolby on ( or might be when off I'd in normal mode ) I have...
Hi, Well done on fixing the Walkman.Do you have a circuit / manual available please ? Regards Peter
Hi, Have you tried lubricating the capstan where it runs in its bearing ? Just a tiny,tiny drop of thin clock oil Cheers Peter By the way looking...
Hi, Have you checked the head and connecting wires ? Cheers Pete
hi, Does anyone know please where I can get service manuals or just circuits for the Olympus micro cassette recorders that use radio tuners ?...
hi, I collect Walkmans and micro cassettes with radios Any body know please where I can get circuits for the Olympus Pearlcorder XR and SD...
Separate names with a comma.
