[MEDIA] I basically found it because a TPS-L2 teardown video came into my recommended because I used the same channel to help me replace my belts...
I think I've figured out the problem [ATTACH] One of the strands of wire that conjoins the redt of the coil to the solder joint was severed in...
An update 2 years later. I found someone selling a WMF-1600B motor standalone on eBay the other day which I bought, so I decided to have another...
It's hard to tell from a still picture. I'm guessing by casette Turner you mean the take up and supply spindles that goes into the 2 holes of the...
Ok wait I think I've found a good solution I used a Pen spring and twisted it into the loop so that it tugs on what's left of the hole. I'll use...
I think I'm gonna have to try what you said before. Doing what I said I was gonna do in reality is much harder than I thought it'd be because it's...
I dont want to be too rash so I'll just use glue as a temporary measure and maybe when you're able to get back to your collection you can do me a...
Uh huh so basically if I want to listen to cassettes I should just build my own Walkman from scratch lol I was hoping this would be an easy fix I...
I brought a TCS 310 on Ebay while the play and stop buttons do work the owner neglected to mention fast forward, rewind and record doesnt work. I...
Did you reflow the solder joint for the ground connection to the headphone Jack sleeve? I dont know what you specifically mean by contact cleaner...
It might be the capacitors, if you have a multimeter and the service manual you should be able to touch the solder spots of the capacitors and...
Basic parts yes. But some things like Motors and etc that are specific to the product will be very difficult to reproduce
Thanks I might resort to spare parts later if I'm going to throw away the motor I might as well die trying to resolder the wire to the wire loops...
Separate names with a comma.
