Actually, I went back and checked it again, and I found out that my pinch roller assembly was bent, causing excessive wow. Now I've fixed that the...
The W&F I got ranged from 0.12 to 0.08, mostly stabilizing at 0.09, 90% of the time. I used tapes from Duplication.ca, 3000hz.
I don't know if anyone still need this but the T-shaped Idler is available on eBay now.
I would buy the parts if they were made available. There are rubber parts already being produced that are sold on eBay(including the T-shaped...
Thanks Deb! Couldn't have done it without you!
Here it is! I have changed the LEDs! They turned out exactly how I wanted them to. I've included two pictures, one in natural light, and one with...
Welcome! I hope you can find what you are looking for. Good luck!
The sony Sport and S2 walkmans are very underrated in my opinion. Sure they may not sound or look as good as some of the other ones, but they are...
Thanks for the reply Deb, and thanks for all the help you've provided. I will check the service manual on adjusting the play back levels. I will...
Update: Good news! I decided to take a gamble and bank on the fact that I had a faulty TA7654P, So I ordered one. I have received the chip today...
Thanks for the reply Deb. Seems like I did it right the first time around. I was a bit confused as you mentioned to check for voltages on pin 6 or...
Thanks for the hastly reply, Deb, really appreciate it. I think I tested the voltage wrong previously with my meter?(I'm not sure) Sorry, im still...
Just finished checking the chip, I am getting 5.97V, on pin 8, not quite 6V. Also no power on pin 9 what so ever. As for the other pins that needs...
It seems that whomever tinkered with this before forgot to put the little metal lever back into its slot, the one that's triggered by the play...
Thank you once again for the reply Deb. I think I do remember seeing the small idler touching the plastic gear assembly. I will check that and the...
Separate names with a comma.
