Prices vary depending on many factors and at the end of day it depends on: - how big the demand is, meaning how many people actually want to buy...
This walkman has more than one problem that was mentioned initially. @flyman has started a private conversation with me and once we reach some...
You mention that the TCD-D100 suffers from a potential broken gear of similar design to the WM-DD series (plastic molded on metal). Do you have...
Yes, a faulty electronic component can cause increased current (although unlikely) but: 1. It would not cause hum if it's not from the motor; 2....
Have you solved the problem by doing something on the potentiometer ? Can't give you an answer since I never seen your device. The increased...
So to be clear, is there a clear correlation between FWD/PLAY label on the button and normal center gear/thick gear ? FWD labeled units are...
Ah, didn't realise the MZ-2P is a player only. That explains why there is no writing current adjustment. I don't know what to say, please post...
Glad my post was helpful ! I did find the laser read power adjustment (there is also a separate write power one), don't know what to say. It's...
All parts are interchangable with the exception of WM-D3 which has some additional parts like the counter and the REC/PB lever which do not exist...
At 6.6Wh in total for the NiMH, the 18650 cells have 3.8times more capacity so you should get close to 4 hours of use. The NiMH ones seem to be...
Hello and welcome to the forum ! We can help you in giving some guidelines, but we can't give you an exact price quotation because at the end of...
Let me make myself clearer: you need to measure the current of the motor itself not the current draw of the whole walkman. So forget about that DC...
Just taking the belt out is not enough, as there is the servo circuit and the amplifiers which have their own idle currents and I don't know the...
Yes indeed it's much higher than it should be. If it was 105-110mA rather than 100mA I would say to leave it alone, but at 122mA it's a concern....
Looking at the schematic, the battery and the DC in jack are in parallel so I have to assume the DC-DC converter (CP501) operates on a wide...
The MZ-1 is a pretty complex device and while I'm not familiar with it I want to share some thoughts regarding your issues: 1. The reading...
Those without the SONY branding are most likely genuine chips. Never seen a fake one myself without a SONY logo. The older ones (late 80s) are...
First of all, you will need to break the circuit in order to measure the current, so the current is deviated through the meter. It is very...
For measuring current, you need to connect the positive lead of the meter to the A/mA socket and connect the meter in series with the walkman....
Capacitors won't manifest this symptom, I would not consider them as a potential culprit. While caps are a common problem on these, it is Nichicon...
Separate names with a comma.