@stef It would be useful to put some prices.
From what I can see this unit is a dual-capstan one. Given this, it is worth checking/replacing both pinch rollers to make sure the tape tension...
Mechanics-wise, all DDs are almost identical: WM-DD, WM-DDII, WM-DDIII, WM-DD30, WM-DD33, WM-D3, WM-DC2, WM-DD100. The different ones are the...
FF/REW not working is a relatively common problem, especially if the unit has not been used for a long time. Cause is dried grease on a lever. I...
Glad to see a D6C bought at such a good price ! Thanks for sharing ! Maybe people will learn from this that these devices can be found at prices...
Yes, replacing just C103 and C203 will do the trick.
Hypotetically it is possible, but it my opinion not worth it unless you already have the replacement one. The original one is more than good...
From what I see in the schematics there is a difference in the compensation circuit in parallel with the head: - WM-DD33 uses C=1000pF and R=47k;...
I'm really glad to hear you were able to finally fix it ! This tight fit creating friction makes a lot more sense than the spring. I remember of...
Indeed check that the mode switch is aligned with the mechanism. There is a hole in the PCB where you can align that switch with a pair of tweezers.
Use the one that you have found to be the closest to original. Not worth bothering to find the original, as you won't find one unless you but a...
It sounds like rubber slipping, like a dried rubber tire. I wanted to say pinch rollers, but you say you already replaced those. Make sure...
Just found this: https://insidehifi.blogspot.com/2014/04/jvc-dd-5.html Given what I see in the picture @Mister X posted, it's a direct drive. It...
Hello and welcome to the forum @WebSpareParts ! It's always nice to see one more company selling such parts. Have looked on your website and seen...
In regard to the belt, I have to add 2 aspects: - the one in the first post is likely too thick at 0.7mm; the correct one should be 0.5mm; -...
I would clean the switches themselves to eliminate increased resistance in the switches as a potential problem. To me it looks like the...
There shouldn't be a significant difference. Mine can measure at different frequencies, but 10kHz is the maximum, that is why I chose this one....
Let me measure some new ones and tell you what new ones do measure. EDIT: 47uF @ 6.3V measures 2 ohms ESR 220uF @4V measures 0.9 ohms ESR 220uF...
Yes, it seems the battery terminals can be left alone. I did one of these some time ago, but could not remember exactly if the terminals need...
And the speed chip is just one of the potential problems. It's not like rubber does not degrade over time or hybrid potted modules do not fail. Or...
Separate names with a comma.