Excellent training on the measurement of the sound characteristics, thank you, will read the wiki article too. I learned for this software I had...
I have run WF tests using recommended software WFGUI, it was difficult to get good screen shots as results for some (502&808) varied a lot. Also a...
This software is named "Audio Spectrum Analyzer dB RTA", Marina Polyanskaya developer; The light blue lines are actually dynamic, moving with...
EX808 vs EX502 vs EX172 : speed and W/F comparison using 3000 hz signal tape (Marion @FixYourAudio version): EX808 seems to have a good bit of...
Detail comparison photos, just to add to learning from post: Comparison of "Gear K" [ATTACH] Donor Gear had damage on back, appeared to be from...
Note medium sized gear immediately to right of the white arm, something slightly different in gears... I will check diameters...
Comparing EX808 with donor EX707 mechanism (included free artwork!) [ATTACH] [ATTACH] There is a difference on one gear with green keeper...
Sorry for my absence, I have not been able to access the S2Go server for some time... The gear identified as "Gear (K)" Sony part 3-365-755-01...
Sony Drive gear (K), 3-730-467-01, or 373046701 also associated on sony parts site with this part: SON336575501 even on Amazon as ASIN...
[ATTACH] In similar mechanisms, they are also marked "K", and exactly same part number: ex-66,ex-77, ex-88, looked at ex-811, -555, 502/508 ,...
how did you edit that post? Ah ok... yes i think you're right, i looked at an EX-502 (one of least expensive i could find), which has a -60 in...
Thanks Valentin... i tried to treat gently, did not force it, just gently turned CCW then CW, watching for movement... the mechanism has always...
Couldn't get mechaism to shift, so decided to remove capstan pulley and gear to see what's behind them: [ATTACH] also noticed some letters on the...
..Also, I pushed in the solenoid and spun the left capstan pulley, which then changed the FF/REW position, but can't figure out how to get it back...
Installed new belt from Marian: belt appears to work, however doesn't play , but will rewind one direction: I notice there appears to be...
AE_Stereo: that looks great in your unit! old forum didn't have likes, but it looks great! both radio dial and cassette mechanism! You can...
LED in the Cassette mechanism: Ken80s: that was a pretty creative idea, using LED externally to light the cassette! Are you still happy? Was it...
I ordered belts from FixYourAudio, and that is the size of the square cross section, 0.6mm... I am excited for the belts to arrive so I can...
Excellent photos of the pinch roller change! Process makes sense, and showing the proper orientation is great!
Purpose of Post beside Idler Pulley? What is the purpose of this post? I measured clearance with feeler gages: 0.6mm would go, 0,63mm will not...
Separate names with a comma.
