Many thanks, @Silver965 for your help , I Understood I have to connect the resistors to an amplifier, but How can I do it? Soldering a wire...
The bad news are only one channel is present, not as loud, as it should, but good quality, bbe, dsl, dolby, working ok. Mechanism runs smooth and...
Recapping[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] work and a good cleaning done
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]
Well, there are not very good news, I've got the unit, outside everything ok, but a hinge is broken. The sound is very loud, only one channel...
A new unit is comming... I bought as non working, I think recaping its needed. The seller lives next to the sea in Spain, don't know if this cause...
Hi @autoreverser, I live in Spain, let me know what you need, I'll try to help you
I mean the unit have a thick plastic gear different to the typicall and problematic central gear of the DD models, but have labeled play instead...
A modelo with play button instead of FWD but with no central gear...
Here you are the thread with my unit: http://stereo2go.com/forums/threads/aiwa-hs-t70.7127/#post-51137
Hi Claudio, I have the same model, you can see the specs of the caps by looking at the own cap. I had the same problems, had to replace several...
I'm very happy if my work helping another one, because for me it would be imposible to fix the bad boy without the helping of this guys and this...
At least a curiosity, the model printed in the PCB is HS-PL35
Sound analysis, silky and analogue, not any traces of aggresives highs or vocals, rounded bass, very detailed and no any fatigue after several...
The poor unit was very badly treated, the piece was straighten but issue remains, the cabinet was so deformed near from A side pinch roller, did...
[ATTACH] The mecanism was cleaned and lubricated, issue with side A turns into a big W&F but it doesn't stop. Removing the lid It was a deformed...
One it was put in place and soldered the secondary pcb, the funcionality was restaured! Every button works as It should, including remote hold switch
Soldered was a hard job, previously I have to remove the secondary pcb in order to gain access
[ATTACH] The funcionality was restaured with any issues untill today, only notice is remote switch hold doesn't work, in any postion the buttons...
Was time to face to diode's issue. With the HS-PL50 the solution was this
Separate names with a comma.
