No, that is normal
here... [ATTACH]
1. Flux - Essential 2. Solder wick - Essential 3. Lint free foam swab sticks - baby cotton sticks are good enough 4. Solder - Thin one should do,...
I mean the DIAMETER is negligible, but if it is thinner that`s the other story. I apologize for my ignorance. Just for the reference, here is the...
The difference between the central gears is negligible, beside that you measure the Marianş gear not the original one. My point was that you can...
No need to open the walkmans just to prove me. I believe you, you are obviously more experienced than I am, but I could swear that I once tried...
Correct me if I`m wrong, but I think that only the smaller, magnetic gear is bigger on DD series, not the main central gear, so it can be...
Don`t use lighter fluid for cleaning pinch roller, lighter fluid is gasoline and gasoline melts rubber. Use alcohol instead.
Now try to explain this with words only :)
Yes, you can pull it out with small screwdriver or knife.
I hope that clears it up...[ATTACH]
It is a bit hard to explain, but I`ll try. There is a small movable part with a spring on the lever which engages the central gear. This part...
I had similar problem with Marian`s gear. The solution was to grind a bit of the moving part of the lever so that it sticks a bit more out, so the...
You can use Kontakt spray for the pot. You just need to remove the housing (very easy on dd33), then flatten the tube of the spray so you can...
Are you sure that is not mechanical ? Symptoms are the same as if you forgot to engage the little black lever into the head lever`s "fork" ...
I think that the button locking levers are dirty or the small lever (which ejects the button if the cassette door is been open while playing) is...
You only need to unsolder the head wires and then flip the PCB.
Hi Boodahkan, You can send the D3 to: Matic Kragelj Krivec 4 1000 Ljubljana Slovenia IMPORTANT : If you live outside European union, please...
Check the capstan rubber if it is greasy, clean it with a hard pencil rubber and alcohol. Check also the tension screw if it is to loose
I recently got a WM2 on each I replaced belt. It is working, but it seems that FF and REW operations doesn`t auto shut-off when tape reaches the...
Separate names with a comma.
