I checked the fork and it is springy and the solderings on the head seems fine. The picture I had is from a DD2 just for to illustrate the the...
Hey! I bought a WM-D3 with a broken centergear and replaced it with Marions. After replacement all gear runs smoothly but it doesn´t engage the...
It is triggering on both directions with any cassette.
No,its New correct one.
Now I have found a temporary solution for the other walkman that suddenly goes to a reverse mode. If I first let it spinn in Fw and then back in...
Thanks for Your advice. Luckily I found the problem on the other Walkman. It was a bad soldering joint on the transport direction switch. Now It...
Hello! I changed the belts and idle tyres with my 2 WM-F77. The first one works great untill it suddenly change direction. The other works fine at...
Hey! No noise when playing tapes not recorded through mic. Noise heard in playback with tapes recorded through mic. No noise with blank tapes.
Yes, much hotter
I found it on a fluemarket
To be accurate about the noise i should describe it as a combo between humming and whinig and it occurs as far I can hear only when recording...
Here is the new mute module fitted to my WM-D6. It plays very nice now but You can hear a"phoff" when You start play and even when fwd and rew...
There is only scrathing from the rec lever pot when I turn it while recording. The humming is still there but disapper with medium loudness....
[ATTACH] Here is the jack I took from my other WM-D6C and the partnr from the new I bougth. I´m not sure what You mean with metal back pandel and...
Happy New Year! He is the latest from my issue. I thougth it would be too risky to dissambly the jack so I replaced it with a new one I bougth on...
Hello again and thank You for Your engagement. I haven´t had time to desolder the jack because of other dutys but I´ll report as soon as I have...
Thank You! Hope You had a nice Christmas too! Yes, there is distorsion only when recording with a mic and then in both channels.
Hello again. Back from Christmas. I have tested both Line recording and my microphone and there is no problem with these. I even sprayed contact...
Thank. You!
Ok,sorry there is a Little missunderstandig about the issue. I have no problem with Line in recording from different source but recording with a...
Separate names with a comma.
