Hello and welcome to Stereo2go.
Simon, that sounds like a good plan if the problem is the gear and if Ian decides to contact me regarding a repair.
Hello Ian and welcome to Stereo2go. Here are some photos which I took while repairing a DD9 a few weeks ago. There are two of the green gears, one...
Hi Retlor and welcome to Stereo2Go, I would start by checking the belt. The WM-9 dates from the early 1980s. If the belt is original it will need...
Hi and welcome to Stereo2Go.
Thanks for sorting that out and eradicating the bots.
Still happening. One appeared 5 minutes ago.
Hello Ilya and welcome.
C607 and C317 are both polarised electrolytic capacitors which will have been subjected to the same zapping (over voltage or reverse polarity) as...
Thanks for the mention @Longman. I was typing a reply as you posted. The tantalum caps are both 10uF / 16V. Check the physical size when ordering...
Generally the linear supplies are much bigger and heavier. That said, I normally open them up and take a look at the circuitry inside to make...
The problem with using a 5V wall supply is that most of those sold these days are switch mode type supplies. These usually have AC coupling from...
I think Eneloop Pros are the better option as you will be running the CX20084 at 5V rather than 6V (or more). It will be a lot safer. One reason...
DON'T USE A PLUG IN POWER SUPPLY on a WM-D6C! Recently one of my customers managed to destroy a CX20084 ic on his D6C while running it on...
Still here and still fixing walkmans. Happy new year to everybody.
If you don't mind sending it across the pond, I'll be happy to take a look at it for you. I'll send a PM.
If there is no power on pin 11 then there will not be 2.2V on pin 12 as the CX20024 cannot generate the 2.2V reference it it does not have any...
Did you check pin 12? Bear in mind that the pins are numbered from 1 to 13 but there is no pin 9. If there is no 2.2 reference voltage on pin 12,...
The drive system on the D6 is very different from most D6Cs. The D6 does not use the CX20084 IC. All D6Cs built up until 2001 use the CX20084....
Hello Squiggly and welcome to Stereo2Go. The speed issue sounds like the CP602 module has failed, which is a common problem on the D6. This will...
Separate names with a comma.
