I'm glad to report that the machine is now working correctly! I tried this - didn't seem to help, so I gradually increased the resistance. By...
Hello: Thanks - though I think the original batteries are now beyond serviceable usage, as I'm seeing the LED dim. The following is all with the...
Hello - and thanks yet again for the advice. Apologies again for the delay in responding - I feel I'm somewhat losing my mind with this project!...
Hi @Valentin Sorry for the delay in updating here - life overtook me for a while. I think you might be onto something here... I'm measuring the...
Free running, this motor draws about 10mA with a supply of 1.6V; for comparison, the spare motor I have draws about 13mA under the same...
Thanks! It rises - yes - but the characteristics are a little different: we now see the signal rise above 0.7-0.8V as the mechanism starts to...
Thanks for the continued guidance - and apologies for the continued messages... still trying to understand how this circuit is supposed to...
Hello, > No, I suggest removing the solder bridge not the IC (hence why stating "PLL bridge"). Sorry - I completely misinterpreted what you...
Hi - thanks so much for your continued input. For the record, I'm using Duracell alkaline batteries, which are currently producing an unloaded...
Hello again... Still fighting the same issue, but I've now done some poking around the CX20084; whilst in FF or REW, the voltage on pins 7 and 8...
Ok - interesting... I didn't think I was being an idiot, but it looks like I might have had some finger trouble before, and the same problem is...
Thanks so much for the advice - I'll check on that!
Hello, Many thanks for the suggestions. Sorry for the delay in replying - I've only just got to looking at this again. I've stripped down the...
Hello, Many thanks for the amazing resources people have posted around here for resurrecting old Sony Walkmans - so useful and appreciated! I've...
Hello, Very grateful for the really useful resources people have posted here - helped my getting a Sony WM-DC2 into life, but now having an issue...
Separate names with a comma.
