Testing IC5 & Transistors: Everything was looking okay motor did not move on powering Testing IC6: To GND IC6 pin15 DIR Jumps between .5v to 2v...
Update 2: looking good It seems like I had to reflow solder into Q19 & Q17 because now the motor is not spinning on powering. ( could have been...
Small update. Motor still running in FF after supplying 2v from my DC bench. Suspicious of the path to PIN 1 on IC5 as it only receives ~.2 v...
I have an after market battery that feeds 2.4v to the unit. I was wondering if this would affect performance. I do have the battery compartment as...
I’m working on an Aiwa HS-PX30 that constantly goes into fast-forward as soon as power is applied. None of the transport buttons respond. The...
I finally figured it out! If you’re running into similar issues while reassembling the HS-G08, here are two key things to watch for: 1. Delicate...
mini update: I had it working for a few tries but then the same issue plagues the unit. All I did was clean the pinch rollers :banghead:
hello everyone! First time working on this unit I can’t really find much about repairing it. When I was first working on the unit the leaf...
Quick update: the left channel has completely gone silent Only thing that I changed was re soldering Sw1 Did a quick continuity test on the...
Thanks for the information I wanted to make sure I went through all of it before I replied Also both of you were on the money when you mentioned...
Hello, I had quiet the troublesome time with this unit I can not figure out why this might be happening. I've done basic care already like...
It started with a Walkman I bought on Facebook market place. Now I spend most days looking for the next player to restore or to add to my...
Separate names with a comma.