After soldering caps and 5 cables (checked that with picture taken befire unsoldering and it's ok) my Aiwa has a buzz sound when playing tape. I...
I've read few posts of people who done battery compartment with 3D printers, but whenever they were asked for files to print, they didn't answer....
Thank you Valentin and Emiel, I hoped it's not that important. And replacing those 330uF caps with SMD ones is PITA. I use Sennheisers P100II...
Seriously, I've got 330uF SMD caps and whenever I try to make those legs thinner, they just break. I used through hole 220uF caps instead for now....
You can move switch from underside of the board to middle position. This switch is exactly on the middle of the pic. It looks more like a fork ;)
If I won't forget I will. Just in case, there is a small hole on the lower part pcb, and switch should be in the center position. It's visible...
I moved switch and it was working ok.
Just in case people wanted to see this two parts together (battery pack and cable with plug soldered) connected with Aiwa P202 (and checked with...
I-img1200x900-1627541186y8ndlm494879 by Raul posted Sep 7, 2021 at 9:52 PM Here it is :) It is possible that setting are the same for SX1V and...
I've got Panasonic SX 5V with radio. It has Japanese area stations settings, but I cant change it to EU or US. The closest I can do is set to free...
Most Walkmans doesn't have line out
THis is a port that's soldered, it could desolder, it could have rust. If it doesn't look like broken from outside, check from inside. Before...
After changing belt (from fixyouraudio) and soldering board I tried to play the tape. 1. The tape is inside, motor spins (same thing happens...
Yes, that would help us, people with Aiwa and no battery case :)
Jorge: Thanks, will look for for diamond needles.
I will try, thanks. THis kit has some SMD caps too so it doesn't make sense, if I will fit them then I will fit them all :) Ok, now I understand....
Three near bottom, 330uF, 220uF on the left of it and on the right for sure, and probably this top 330uF too, but to less degree. Thank you very...
My Aiwa P202 (I) had issues so I checked capacitors and many of them leaked (I home not destroying anything important). Don't have service manual...
What exactly is Tun(+). I tried Scan +, I've tried Preset Tune button with Radio On and nothing. If I press them together radio doesn't start. It...
Not all SX are the same. You mean plastic vs metal outside? I would take better mechanics anyday. I destroyed two S60 trying to repair belt....
Separate names with a comma.
