LED in the Cassette mechanism: Ken80s: that was a pretty creative idea, using LED externally to light the cassette! Are you still happy? Was it...
I ordered belts from FixYourAudio, and that is the size of the square cross section, 0.6mm... I am excited for the belts to arrive so I can...
Excellent photos of the pinch roller change! Process makes sense, and showing the proper orientation is great!
Purpose of Post beside Idler Pulley? What is the purpose of this post? I measured clearance with feeler gages: 0.6mm would go, 0,63mm will not...
Lubricated Capstans/shafts, ordered belt [ATTACH] Split lock washers are really small, lost one for 30 minutes and it appeared a foot away from...
mode switch #1 is the A/B cassette detector switch mode switch #2 is the 3 position switch moved by the FWD/REW arm [ATTACH] [ATTACH]
Valentin, Procedure to hold lever up into solenoid worked, after turning capstan wheel, FWD/REV lever easily moved to center position! Thank you,...
I couldn't figure out how to move the FWD/REV arm... I gently pushed, pulled: Pretty sure this is the solenoid: i pushed and pulled, rotated the...
To remove PC board: 1) Remove the 5 screws (well described in the Service Manual) around the board: [ATTACH] Suggested to keep track of exact...
Clarification: the belt was new but not from FixYourAudio: I will order the correct belt and rubber pinch rollers from Marian. I applied gentle...
Interesting, when I went to upload photo, I noticed this earlier photo, the FF/REW switch is centered! I don't want to get the logic circuit...
Excellent analysis of Block Diagram! That will help me! This was exactly what I needed! I did not know how to read! I have learned my lesson to...
Just as example, could the unit somehow have lost its direction info? I didn't mess with the board, remove it, or change this switch, but how do...
OK thank you i will definitely check this! I've been scouring for models similar, but having trouble finding exactly what is checked at startup......
Question: what switches and sensors are used before Walkman can run? and where are they? I think this would really help me know where to start...
on my slim metal WM-EX808, normally when I would change the battery, there was a short “click” that sounded like the motor engaging then...
I've found this site recently while looking for technical info, as I've purchased a few Walkman and begun to change belts, pinch rollers, and...
Separate names with a comma.
