Please create a new thread about this issue, as the solution likely won't be a one post one. If it proves to be related to the CX20084, we'll put...
Does adjusting the speed trimpot change the tape speed or not ?
I have asked myself a lot of times if this is something good or bad. Have talked with other people about it and opinions are mixed. From a waste...
I do like the leather case you have for your D5M, that one is rare to see in such good condition. And the device itself is also in mint condition....
The bigger issue I see with this is not Spotify itself disappearing (which I am convinced won't happen, of course others are free to have...
I have an impression that you may have changed the motor position and that is what has changed the W&F, not the belt. That belt is not driving the...
It is age related. Most people that are a lot into physical media (especially cassettes and vinyl) were young or very young in the 1980s or 1990s...
Most members of this forum are atypical usesrs when it comes to physical media, I'm pretty sure about that ! The NW-A105 is a very good DAP,...
As sad as this news may look, the time was long overdue for Apple to finally ditch the iPod. DAPs will continue to exist, but the market is a...
Check the supply voltage of IC302 (REC EQ amp), it is located in the bottom left corner as you look at the PCB with cover removed (batteries on...
Ok, thanks for sharing ! Now it makes sense, it's clear what it does. It's there to avoid intermodulation between the bias and the relatively low...
Congratulations for the repair ! Glad to hear the device is working so good ! 1. Don't know what the OSC switch does. Never seen such a switch...
Yes, I confirm the thread pitch is the same on the ones from fixyouraudio. The "P" used in the service manual most likely indicates it uses a pan...
The ones from Marian do contain a screw that will fit (with pan head). Alternatively you can order here a set of M1.4 x 3 or M1.4 x 4 (I think...
On the electronics side, it important to ajust the following: 1. Playback level (this is usually the most off and very uneven between channels);...
This thread covers the complete restoration process of the SONY TC-K411 deck including both the mechanical side and calibration of the electronics...
You have to check if the motor itself spins slowly or there is increased resistance in the mechanism or something slipping. More info is needed.
Have to say the starting figure is not actually that bad. It most likely can be improved, but you will need to do all the things I mentioned,...
You did not mention: what type of center gear do you have ? The full plastic one or plastic molded onto metal disc ? Pinch roller, yes, I would...
Hello and welcome to the forum, @musicplayer ! Being such commited to collecting portable audio is something, I'm impressed ! I'm looking forward...
Separate names with a comma.
