Can you post a picture of how the belt is routed on this AIWA ? 70mm is very different from the 55mm I stated in that thread and the mechanism...
Given the similarity of this mechanism with the Pioneer PK-5AW/R7AW, I think the diameter is ~55mm. Here is my thread about the Pioneer:...
Go for this one: https://fixyouraudio.com/product/belt-aiwa-hs-j02/
@JUAN ANDRES MONTIEL DIEZ What serial number does your WM-2 have ? (serial is in the battery compartment) It seems you have the thicker center gear.
@Mister X DAT uses tape similar to Compact Cassette (4mm). Tape is metal, but with different magnetic properties than TYPE IV tapes and also...
@orange Seems I didn't get notifications for the thread updates. In regard to the pinch roller, your best bet is to clean it very well. You will...
Here I have yet another example: a WM-2 for sale at the equivalent of 120 euros. Seller claims the unit is working flawlessly, however the serial...
@TooCooL4 I was not interested to buy that walkman in the first place. But saw the ad as an opportunity to share the info on the forum, so newbies...
I want to give you another example of a seller lying about his listing: The below printscreen is a red DD1 for sale at the equivalent of 180...
@TooCooL4 I was reffering to the DDs that have a center gear type mechanism. DD9, D6, D6C, TC-D5/TC-D5M/TC-D5Pro are not part of that list, as...
Given a trend I have seen going on, I have decided to make a guide for people which have not bought a DD walkman, but are interested to do so. All...
The PCB looks very different on the EX1HG, which is the same as EX1 according to service manual. Also the EX1/EX1HG does use a different mechanism...
Don't know what the differences are between EX3 and EX5, if any. It might have something to do with EQ presets, in the sense that EX5 has more of...
This is the PCB of the WM-EX5. There is a resistor (measures 360 ohms in circuit) soldered on the EX5 silkscreen marking. There is another...
@Raul That is true from what I remember, but there are some configurarion resistors that change something in the microcontroller behavior between...
Update the thread when you desolder, no need to do it now. Something that should be checked on these are the loading guides mounting points...
Yes, it's the CLOCK button I was talking about. About the second issue you mention, I have some questions before being able to answer: - is the...
How did you conclude that the time is lost ? You need to press the TIME button a couple of times after re-powering on in order to see the clock....
I repaired both TCD-D7 and TCD-D8 and I remember there was a supercapacitor, not a battery for the clock power. The service manual confirms it,...
@TooCooL4 I stopped paying high prices some time ago. In fact there were just a few instances where I really wanted something bad enough to pay a...
Separate names with a comma.
