Just found this: https://insidehifi.blogspot.com/2014/04/jvc-dd-5.html Given what I see in the picture @Mister X posted, it's a direct drive. It...
Hello and welcome to the forum @WebSpareParts ! It's always nice to see one more company selling such parts. Have looked on your website and seen...
In regard to the belt, I have to add 2 aspects: - the one in the first post is likely too thick at 0.7mm; the correct one should be 0.5mm; -...
I would clean the switches themselves to eliminate increased resistance in the switches as a potential problem. To me it looks like the...
There shouldn't be a significant difference. Mine can measure at different frequencies, but 10kHz is the maximum, that is why I chose this one....
Let me measure some new ones and tell you what new ones do measure. EDIT: 47uF @ 6.3V measures 2 ohms ESR 220uF @4V measures 0.9 ohms ESR 220uF...
Yes, it seems the battery terminals can be left alone. I did one of these some time ago, but could not remember exactly if the terminals need...
And the speed chip is just one of the potential problems. It's not like rubber does not degrade over time or hybrid potted modules do not fail. Or...
The tape selector and motor connectors do need to be removed indeed. Aside from that, there are 3 other connections that need desoldering: - there...
It depends on what your skills are. I would say it's not very difficult, but it does invlove some extra steps: - you need to remove the door; -...
Check the wires of the sled motor first. After cleaning and lubricating that middle gear, the laser should go back to the ToC position (near the...
Since you lubricated every rotating part, what else can be causing it ? If something is dragging, you will feel it by hand. Does that small idler...
I'm glad you found one that is working good and you paid a decent price on it. In regard to prices, it depends how patient you are. When you are...
Separate names with a comma.
